Installation method of small home elevator

Small household elevators, as large and precise household furniture, have high requirements for the installation environment. The installation quality of the elevator determines the operating status and service life of the elevator. Therefore, the owner must determine the elevator installation conditions before the elevator installation, and strictly implement them.

The installation of small home elevators is as follows:

1. Vertical well space
According to the installation position, the elevator can be installed in the middle of the stairs, on the civil engineering shaft and the wall. No matter where it is installed, a vertical space is required. This is especially important when installing small home elevators on cut floors. In many cases, the communication between the owner and the construction team is not smooth. It is easy to see that the holes on each floor are the same size, but they are not in the vertical space. Small household elevators cannot be installed and require secondary construction, which wastes time and manpower.

2. Reserve enough pit
Elevator installation generally requires reserved pits. Spiral small home elevators can be installed without a pit, or a pit with a maximum depth of 50 mm is required. Therefore, in addition to being installed in a traditional villa environment, it can also be installed in a high-rise duplex building. It is not possible to dig a pit, and the installation is convenient and flexible.

3. Reserve enough ceiling height
For safety reasons or due to the structure of the elevator, sufficient head height space should be reserved for installation. Ritko Aritco 6000 series small home elevators can be used as half-height doors, requiring extremely low ceiling heights, with a maximum height of at least 1100 mm.

4. Determine the power location and wiring
Small home elevators have different power supply locations due to their different structures. The power installation positions of the three Riteco Aritco small spiral elevators are different: Aritco 4000 needs to be reserved for the top, Aritco 6000 for the second floor, and S series at the bottom. If the standard matching speed is selected, 220V single-phase three-wire power supply is required, and the matching speed requires 380V three-phase five-wire power supply.

5. The hard-installation work at home is completed
As a kind of precision large household appliances, household elevators need special attention to prevent dust pollution during installation and routine maintenance. If an elevator is installed before the renovation, a large amount of dust generated during the renovation will enter the elevator. On the one hand, the elevator is difficult to clean, and more importantly, the fine dust entering the elevator structure will affect the normal operation of the elevator. Greatly shorten the service life of the elevator. Therefore, the installation of small family elevators must be completed after renovation.

https://www.sxlift.net/