How to install elevator access control?

Nowadays, many elevators have been equipped with access control, so how can elevator companies cooperate with elevator control manufacturers to complete the installation of elevator access control? Next popular science.

1. Party B needs to open a square hole on the elevator car control panel to install the card reader. The size is: length 88mm×height 55mm. Leave a space of 35-40mm behind the opening position. The elevator company The design of the compartment control box reasonably determines the installation position of the IC card reader according to the actual situation of the COP version of the keys. It can be installed horizontally or vertically, and provide relevant drawings.

2. AC 220V power supply must be provided near the top of the elevator machine room and the car for IC card equipment.

3. The equipment of the IC card elevator control system needs to be installed on the top of the elevator machine room and the car. The elevator company should consider the installation position of the elevator main controller (box size: 350mm×350mm×110mm) on the top of the elevator car and provide relevant information. 'S drawings

4. The construction party shall have elevator maintenance personnel on-site to provide support during equipment installation and commissioning.

5. The elevator party provides a 6*0.75mm2 accompanying cable from the machine room to the top of the car for the communication between the group controller, networking, and fire fighting equipment and the main controller. The wiring construction and binding, etc. require on-site technical guidance and cooperation from the elevator company.

6. The elevator company needs to provide a passive switch fire-fighting signal on the top of the elevator car, which is used for the fire-fighting linkage function of the IC card elevator controller.

7. The elevator company cooperates with Party B on site to intercept the access of the elevator button signal line by passive dry contact.

https://www.sxlift.net/