Moving the car: When the car stops between the two floors and is not in the unlocking area, the car must be moved to the leveling area before the car and the floor door can be opened to release the passengers. If the driver can operate the maintenance switch (slow or slow) in the car to move the car, or the rescuer operates the maintenance switch at the top of the car to complete the car movement, reach the leveling area, and then according to the specific situation, according to the above method An open layer door is placed. If this method does not work, it is necessary to use a traction machine in the machine room (which must be cut off under the power supply of the elevator) to move the car. When the hand traction machine moves the car (there is now a speed reducer for the traction machine), attention should be paid to: first cut off the power supply of the elevator; use special tools (such as handwheels); must be performed by specially trained skilled personnel; The car door is indeed completely closed; and: notify the personnel in the car; no less than 3 people in operation, one of them is also the commander; master the tools and operation methods using the special loose brake brake, slowly loosen the brakes, shake the car, Several people must cooperate properly; should be monitored on the level of the door level of the leveling door. When the car makes the car fast, use the walkie-talkie to talk to the commander to stop the car, so that the brakes can be hugged immediately. brake.
